BENSHAW RSi GM2 Series - Page 225

215
Table of Functions
890054-00-00
GM2 Series VFD
Code
Comm.
Address
Name
Setting Range
Initial
Value
Property*
V/F
SL
Ref.
[7] Displayed if either OU.31 or OU.33 is set to 35 (BR Control).
[8] Displayed if Ad.50 is not set to 0 (None).
[9] Displayed when Ad.70 is set to 1 (DI Dependent).
[10] Displayed when the Ad.74 code is set to 1 (Yes).
[11] The Minimum setting is either the DC Voltage level (converted from bA.19) +20V (for 240V
VFD's) or 300V, +40V (for 480V VFD's) or 600V.
[12] Displayed if Ad.80 is not set to 0 (None).