PowerWave Operator’s Manual 3-55
• Press SOFT KEY 1 or 2 to select the edit option displayed above the
soft key. The display updates to reflect your selection.
AXIS SELECTION
This screen (Figure 3-62) allows the user to define the X and Y Axis Type.
Any previously defined axis type will be displayed. This option screen
appears only if Manual Map Generation has been selected.
X
/ Y
A
X
I S
T
Y
P
E
:
L
I N
L
I N
/ L
O
G
L
O
G
L
O
G
/ L
I N
Figure 3-62: Axis Selection screen
• Press SOFT KEY 1, 2, 3 or 4 to select the axis identification option
displayed above the soft key. The top line of the display updates to
reflect the selection.
EXTRAPOLATION OF UNKNOWNS
This screen (Figure 3-63) allows the user to choose whether to extrapolate the
curve to evaluate samples outside of the absorbance range defined by the
standards. Any previously defined decision appears on the screen. Not
available for all curve fit types.
E
X
T
R
A
P
O
L
A
T
E
U
N
K
N
O
W
N
S
?
Y
E
S
Y
E
S
N
O
Figure 3-63: Extrapolation of Unknowns screen
• Press SOFT KEY 1 to select YES (extrapolate the unknowns). The
top line of the display updates to reflect this selection.
• Press SOFT KEY 2 to select NO. The top line of the display updates
to reflect this selection.
To Next Page
Loading...
