owerWave Operator’s Manu
2-19
Output Options
• At the SELECT UTILITY OPTIONS screen, press the soft key
beneath OUTPUT to set report output preferences (Figure 2-19).
R
E
P
O
R
T
O
U
T
P
U
T
?
B
O
T
H
P
R
I N
T
C
O
M
P
U
T
E
R
B
O
T
H
Figure 2-19: Selecting Report Output
• Any previously defined selection appears on the top line of the
display. Press the soft key beneath the desired option (PRINT,
COMPUTER, BOTH) to change the output device.
• Press ENTER to advance to the REPORT TYPE menu screen
(Figure 2-20).
R
E
P
O
R
T
T
Y
P
E
?
M
A
T
R
I X
C
O
L
U
M
N
M
A
T
R
I X
B
O
T
H
Figure 2-20: Selecting Report Type
• Any previously defined selection appears on the top line of the
display. Press the soft key beneath the desired option
(COLUMN, MATRIX, BOTH) to change the Report Type. The
display will automatically update with the new type (Figure 2-
21).
S
A
M
P
L
E
S
I N
C
O
L
R
P
T
?
N
O
Y
E
S
N
O
Figure 2-21: Choosing Whether to Include samples in Column Report
• If NO is selected, the column report will only include standard
blank and control well results.
• Press ENTER to advance to the PRINT CURVE FIT screen
(Figure 2-22).
To Next Page
Loading...
