3-10 Operation
WAVELENGTH SELECTION
The MEAS selection screen (Figure 3-10) allows the user to select the
wavelength(s) for the assay. Any previously defined wavelength appears on
the top line of the display and the options on the second.
M
E
A
S
: 4
5
0
R
E
F
: 6
3
0
4
0
5
4
5
0
4
9
0
M
O
R
E
M
E
A
S
: 4
5
0
R
E
F
: 6
3
0
6
3
0
3
4
0
Figure 3-10: Specifying the wavelength
• Use SOFT KEYS 1, 2, 3 & 4 to select the wavelength option
displayed above the soft key. The display updates to reflect the
selection.
• Use the LEFT or RIGHT ARROW keys to move the cursor between
the measurement and reference filter selections.
NUMBER OF KINETIC READS / KINETIC DURATION SELECTION
This menu allows the user to either select the total number of kinetic reads or
the length of time the assay will run (kinetic duration) (Figure 3-11). Any
previously defined value is shown on the top line of the display and the
options on the second.
K
I N
E
T
C
: T
O
T
A
L
R
E
A
D
S
T
O
T
A
L
R
E
A
D
S
D
U
R
A
T
I O
N
Figure 3-11: Kinetic Read and Duration selection screen
To Next Page
Loading...