2-4 Installation
Adjusting the Reader’s Wavelength Table Setting
To check, or change the software wavelength:
• Power up the reader. At the Main Menu Screen (Figure 2-2), press the
soft key under the UTIL menu option.
R
E
A
D
Y
9
: 4
5
P
M
0
5
/ 0
9
/ 9
5
R
E
A
D
D
E
F
I N
E
R
E
P
O
R
T
U
T
I L
Figure 2-2: The Main Menu screen
The Utilities Options menu appears (Figure 2-3).
S
E
L
E
C
T
U
T
I L
I T
Y
O
P
T
I O
N
?
T
E
S
T
S
S
E
T
U
P
O
U
T
P
U
T
R
E
A
D
Figure 2-3: The Utilities Option Screen
• From the Select Utility Option menu, press the soft key beneath the menu
option SETUP. The Edit Setup Information screen is displayed (Figure 2-
4).
E
D
I T
S
E
T
U
P
I N
F
O
R
M
A
T
I O
N
?
D
A
T
E
T
I M
E
L
A
M
B
D
A
m
o
r
e
*
Figure 2-4: The Edit Setup Screen
• From this menu, press the soft key under the LAMBDA menu option.
• The wavelength will be displayed (Figure 2-5). To advance to the next
wavelength, press ENTER.
• To change the wavelength number, use the NUMERIC keypad to enter a
number at the cursor location. The cursor will automatically advance to
the next editable field. To save the entry and move to the next
wavelength on the table, press the ENTER key.
To Next Page
Loading...
