owerWave Operator’s Manu
2-3
After Unpacking, Verify Performance
Each time the PowerWave is turned on, it automatically runs a self-test. If an
error occurs, contact Bio-Tek.
Before Repackaging the Instrument:
• Decontaminate the reader prior to shipping. (Refer to the
Decontamination procedure in Appendix A.)
• Once the reader is clean, pack it in its original shipping box, using
original packing materials. This shipping system was designed to be used
no more than five times. If the container is damaged and/or has been
used more than five times, contact Technical Services for a new set of
shipping materials.
To Next Page
Loading...