2-2 Installation
with improper packaging materials may void your warranty. If the
original packing materials have been damaged, replacements are
available from the manufacturer.
• An RMA (Return Materials Authorization) must be obtained before
returning equipment for service. Contact Bio-Tek’s Technical Assistance
Center at 1-800-242-4685 for an RMA number, and mark the RMA
number on the outside of the shipping container.
Figure 2-1 illustrates how to unpack the reader.
Figure 2-1: Unpacking and packing the reader
• Carefully open the top of the box, and remove the dust cover. The box
will include a power cord, an Operator’s Manual, and optionally, a
Service Manual.
• Remove the end caps from the reader.
• Lift the reader out of the box, and place it on a level surface. Remove the
reader from the plastic bag.
• Place all shipping material back into the shipping box for reuse if the
instrument needs to be shipped again.
To Next Page
Loading...
