PowerWave Operator’s Manual 3-13
• Use SOFT KEY 1 to select shaking for the first read only.
• Use SOFT KEY 2 to select shaking for every read.
• Use SOFT KEY 3 to select no shaking.
SHAKE TIME
Use this screen (Figure 3-16) to enter the desired shake interval.
S
H
A
K
E
T
I M
E
: 0
0
: 1
2
: 3
4
C
O
N
T
I N
U
O
U
S
Figure 3-16: Shake Time entry screen
• Use the NUMERIC keys to enter the shake interval. Valid ranges
are: 0-1 hours, 0-59 minutes and 0-59 seconds.
• Press SOFT KEY 1 to select CONTINUOUS SHAKE. The shake time
will be set automatically according to the kinetic interval.
• Use the LEFT and RIGHT ARROW keys to move the cursor
between hours, minutes and seconds.
SHAKE SPEED
Use this screen (Figure 3-17) to select the shake speed. The shake movement
is a repeated .021 inch movement from the shake position and back.
S
H
A
K
E
S
P
E
E
D
: M
E
D
I U
M
L
O
M
E
D
I U
M
H
I
G
H
V
A
R
I
Figure 3-17: Shake Speed Selection screen
To Next Page
Loading...
