Biotek PowerWave - Kinetic Number of Reads; Kinetic Duration; Shake Mode Selection

3-12 Operation
KINETIC NUMBER OF READS ENTRY
Use this screen (Figure 3-13) to enter the number of kinetic reads.
K
I N E T
I
C T O T A L
N U
M
B E R O F R E A D S : 1 0
Figure 3-13: Kinetic Reads entry screen
• Use the NUMERIC keys to enter the number of reads required. The
range is 2 to 40 reads.
KINETIC DURATION ENTRY
Use this screen (Figure 3-14) to enter (in hours, minutes and seconds) the
duration of the kinetic reaction.
K
I N E T
I
C
D U R A T I O N : 1 1 : 2 3 : 4 5
Figure 3-14: Kinetic Duration entry screen
• Use the NUMERIC keys to enter the time duration in hours,
minutes and seconds. The maximum duration time is 80 hours.
• Use the LEFT and RIGHT ARROW keys to move between entry
fields.
SHAKE MODE SELECTION
Use this screen (Figure 3-15) to enter the shake mode for a kinetic assay.
S
H A K E
:
B E F O R E E V E R Y R E A D
F I R S T E V E R Y N O N E
Figure 3-15: Shake Mode Selection screen