3-60 Operation
Enter Sample ID
If prompted, the user can enter a starting sample identification from 00001 to
99999 (Figure 3-67). The software will automatically increment each
subsequent sample identification by 1. The sample IDs will be assigned by
following the mapping order previously defined.
E
N
T
E
R
S
A
M
P
L
E
I D
:
Figure 3-67: Enter Sample ID screen
• Use the KEYPAD to enter numbers, and the LEFT / RIGHT arrow
keys to move the cursor.
Prompts for Well Location
Well locations (Figure 3-68) can be changed at run time if a Manual Map has
been specified, and the user has requested a sample count at run time via the
Utilities menu.
S
A
M
P
#
1
L
O
C
A
T
I O
N
R
E
P
1
:
G
0
1
Figure 3-68: Enter Well Location screen
• Use the KEYBOARD to enter the well location, using the SHIFT-
LETTER sequence to key in letters, and ENTER to specify the
desired location.
To Next Page
Loading...
