2-20 Installation
P
R
I N
T
C
U
R
V
E
- F
I T
?
N
O
Y
E
S
N
O
Figure 2-22: Choosing Whether to Print Curve Fit data
• Any previously defined selection is displayed on the top line of
the screen. To change the report option, press the soft key under
YES or NO. The display updates to reflect the selection.
• Press ENTER to return to the SELECT UTILITY OPTION
screen.
Read Options
• At the SELECT UTILITY OPTIONS screen, press the soft key
beneath READ to set up Reader Prompt preferences (Figure 2-
23). Select YES to prompt for identifications and sample counts
before a microplate is read.
• Press the soft key beneath YES or NO to select Plate ID prompts
for microplate identification. Sample ID will prompt for an
identification for each sample. Sample Count will ask for the
number of samples on each plate.
• Pressing ENTER after each selection advances the display.
• When selections are completed, the display returns to the
SELECT UTILITY OPTION screen.
P
R
O
M
P
T
F
O
R
P
L
A
T
E
I D
?
N
O
Y
E
S
N
O
P
R
O
M
P
T
F
O
R
S
A
M
P
L
E
I D
?
N
O
Y
E
S
N
O
P
R
O
M
P
T
S
A
M
P
L
E
C
O
U
N
T
?
N
O
Y
E
S
N
O
Figure 2-23: Selecting Read Preferences
To Next Page
Loading...
