PowerWave Manual Upate
Rev. C1, P/N 7261000
The following information pertains to revised instructions for unpacking and repackaging the
reader as shown in Figure 2-1, Chapter 2, page 2-2.
Figure 2-1 illustrates how to unpack the reader.
Figure 2-1: Unpacking and repackaging the reader
• Carefully open the top of the box, and remove the dust cover. The box will include a
power cord, an Operator’s Manual, and optionally, a Service Manual.
• Remove the end cap from the top of the reader.
• Lift the reader out of the box, and place it on a level surface. Remove the reader from
the plastic bag.
• Place all shipping material back into the shipping box for reuse if the instrument
needs to be shipped again.
To Next Page
Loading...
Need help?
General
