1-6 Introduction
Repeatability (STD): +/- 1% +/- 0.005 Abs from 0 to 2.000 Abs
+/- 3% +/- 0.005 from 2.000 to 2.5 Abs
(measured @ 405 nm)
• Display: 2 X 24 Character LCD
• Light Source: Xenon Arc Flash bulb
• Dimensions: 16.0” deep X 15.5" wide X 9.75" high
40.1 mm deep X 39.3 mm wide X 24.8 mm high
• Weight: 40 lb. maximum (18.1 kg)
• Environment: Operational temperature 18-40° C
• Humidity: 10-85 % non-condensing
• Power Consumption: 100VA
Four Voltage Ranges accommodated by voltage selection switch:
Range 1 100 VAC 90-110 VAC, 50-60 Hz
Range 2 120VAC 103-127 VAC, 50-60 Hz
Range 3 230 VAC 207-253 VAC, 50-60 Hz
Range 4 240VAC 216-264 VAC, 50-60 Hz
• Incubation (optional):
Temperature Control: 4° over ambient to 50° C
Temperature Variation: +/- 0.5° C @ 37°C ( with the plate sealed).
• Optional internal Bar Code reader :
If enabled, the internal bar code reader recognizes a number of common
bar code types during the plate read operation. Specific information about
each bar code type is available from Bio-Tek Technical Services. The
reader’s bar code option is compatible with the following bar code types:
CODABAR UPC
CODE 39 EAN
INTERLEAVED 2 of 5 MSI
CODE 11 PLESSEY
CODE 93 CODE 128
To Next Page
Loading...
