About This Manual
vi
About This Manual
This manual covers the operating & maintenance instructions for models:
Changes to this Manual
We have made every effort to ensure this manual is accurate. If you discover any errors, or if you have suggestions
for improving this manual, please send your comments to our Solon, Ohio factory. This manual may be periodically
updated. When inquiring about updates to this manual refer to the part number and revision on the title page.
Chapter Layout
Introduction — Describes the features of the IQC5000B RF Recorder, lists equipment supplied and optional
equipment.
IQC5000 Controls and Indicators — Describes the IQC5000B unit contr
ols, indicators and connectors.
Setup — Describes how to set up the IQC5000B for record and playback.
Spectrum Analyzer Setup — Describes how to set up the spectrum analyzers supported by the IQC5
000B;
Keysight X-Series Spectrum Analyzer Setup, Rohde and Schwarz FSV/FSW, Tektronix RSA6000 Series, and Anritsu
Field Master Pro MS2090A.
Operating Instructions — Describes procedures required for operating the IQC5000B.
Using IQC5000 with IQC Control — Provides instruction for installing, and using IQC control softw
are with the
IQC5000B
Post Processing IQC5000 Recorded Data — De
scribes the recorded data file formats.
Troubleshooting — Provides troubleshooting for common c
onnection problems. Specifications and parts
information are also included.
Maintenance — Lists routine maintenance tasks a
s well as guidance on building RAID0 arrays and formatting
external storage units.
Sanitization — Lists the nonvolatile memory components within the IQC5000 system
and provides procedures for
sanitizing the system.
Firmware Configuration Updates — Provides procedures for changing
unit operation from Single RAID
operation to Dual RAID operation or back.
Specifications — Provides specifications for the IQC5000 system.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
IQC5000B
To Next Page
Loading...
