IQC 5000B Operation Manual
81
Figure 66 Device Restore
10. Allow the restoration is process to continue through to completion.
Note: Progress will be displayed in real time.
11. After restoration is complete, click Exit to f
inish the process.
When complete, the IQC5000B will be restored to the original fac
tory state.
Sanitization Procedure for IQC5000B-ME2, IQC5000B-S08 and IQC5000B-S15
Currently, Bird does not provide a non-destructive sanitization procedure for the solid state devices used in the
external IQC5000B storage devices. Therefore, in order to sanitize these devices, at this time these devices can be
sanitized by smelting in a licensed furnace at a temperature of at least 1600º C.
To Next Page
Loading...
