Content Part A VC 6000
TM
Compact monitor
© VC 6000
TM
Compact monitor Juni 2014 C100575.002 Introduction Vers.10 - 2 -
9 Mounting and Installation 22
9.1 Safety advice 22
9.2 Site conditions 23
9.3 Grounding concept for VIBROCONTROL 6000 Compact monitor 24
9.4 Mounting the instrument 25
9.4.1 Mounting on a rail according to DIN EN 50022 25
9.4.2 Removing from a rail 25
9.5 Making the connections 25
9.5.1 Wiring and connection of sensors 26
9.5.2 Wiring and connection of peripheral equipment 29
9.5.3 System connections 31
9.6 Commissioning and function testing 34
9.6.1 Commissioning 34
9.6.2 Function testing 35
10 Digital Communication 36
11 Typical measurement tasks 37
11.1 General 37
11.2 Works settings for the basic configurations 37
11.2.1 Absolute housing vibration according to DIN ISO 10816 37
11.2.2 Rolling-element Bearing Condition Unit – BCU 38
11.2.3 Rolling-element bearing condition BC-BP (bearing condition bandpass) 38
11.2.4 Relative shaft vibration acc. to DIN ISO 7919 39
11.2.5 Axial shaft position 39
11.2.6 Process value 40
11.2.7 Speed 40
11.2.8 Rod-drop 40
11.2.9 Vector 41
12 Contents index for the following documentation 42
To Next Page
Loading...