Modules & Options
7 - 12 Wireless LAN Module (Windows 8)
7
4. Double-click/tap an access point to connect to it (or click/tap it and click/tap
Connect).
5. Enter a network security key (password) if required, and click/tap Next.
6. You can choose to share or connect to devices or not.
7. When you are connected to the network access point it will display the Connected
icon .
8. Select any connected network and click/tap Disconnect to disconnect
from a connected access point.
9. You can click/tap the Airplane Mode button to turn the mode On or Off.
10. If you click/tap on Change PC Settings (at the bottom of Settings in the Charms
Bar) you can turn Wireless or Airplane Mode On/Off (see over).
To Next Page
Loading...