D - 10 Configuring an External Display in Windows 7
Windows 7
Windows 7
Using the Windows Logo Key + P Key Combination to Switch Displays
You can also use the + P key combination to quickly change display configuration and modes (this is partic-
ularly useful when attaching a projector) in Windows 7.
1. Attach your display to the HDMI-Out port and turn it on.
2. Press the
+ P key combination.
3. An on-screen menu will pop up.
4. Use the cursor keys (or
+ P) to select the appropriate configuration from the menu, and press Enter to
confirm the selection.
Figure D - 7 + P Display Configuration Selection (Win 7)
To Next Page
Loading...