PC Camera Module (Windows 7) D - 25
Windows 7
Windows 7
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in
Windows.
1. Click/tap
Start
, and click/tap
Control Panel
(or point to
Settings
and click/tap
Control Panel
).
2. Click/tap Sound (Hardware and Sound).
3. Click/tap Recording (tab).
4. Right-click Microphone (Realtek High Definition Audio) and make sure the item is not disabled.
5. Double-click/tap Microphone (or select Properties from the right-click menu).
6. Click/tap Levels (tab), and adjust the Microphone and Microphone Boost sliders to the level required.
7. Click/tap OK and close the control panels.
8. Run the camera application program from the desktop shortcut.
9. Go to the Devices menu heading and select Microphone (Realtek....) (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it should have a tick alongside it).
11. To obtain the best sound recording quality enable Noise Suppression in the Realtek HD Audio Manager
control panel (see “Setup for Audio Recording” on page D - 14).
To Next Page
Loading...