Bosch CRI 848H - Training Requirements; User Group; Delivery Specification

1 689 989 087 2018-07-24| Robert Bosch GmbH
Product description | CRI/CRIN 848H | 55
en
3.2.2 Training
Users must have been trained in the mode of operation,
checking and repair of common rail injectors. Appropri-
ate instruction is provided by Automotive Aftermarket
(AA) training centers.
3.3 User group
The CRI/CRIN 848H is only to be operated by specialist
personnel instructed and trained to perform diesel test-
ing. Knowledge of how to handle and use the EPS 708
or EPS 815 with the tester set CRS 845 /CRS 845H is
also essential.
3.4 Delivery specification
i
The scope of delivery varies depending on the ver-
sion ordered (1 687 002 848 or 1 687 010 368).
i The order numbers in this section are only for infor-
mation.
Designation Order number
High-pressure pump with clamping accesso
-
ries
1)
1 687 222 181
Frame for clamping device 1 687 034 628
Distributor rail
1)
1 687 419 049
Injector holder 1 685 200 145
Adapter for injector holder 1 685 720 301
17.5 mm clamping bush (6x) 1 681 091 175
19.5 mm clamping bush (6x) 1 681 091 173
20.5 mm clamping bush (6x) 1 681 091 182
21.5 mm clamping bush (6x) 1 681 091 174
17.1 mm guide sleeve (6x) 1 680 300 283
19 mm guide sleeve (6x) 1 680 300 284
21 mm guide sleeve (6x) 1 680 300 285
Holding device for CRI 1 685 200 149
Trigger electronics1) 1 687 023 357
Connecting cable for CRIN 1 684 463 799
Connecting cable for CRI
1)
1 684 463 506
Connecting cable for CRI
1)
1 684 463 519
Power cord
1)
1 684 463 503
Power cord
1)
1 684 463 504
Serial connecting cable RS232
1)
1 684 465 388
Test pressure line 45°
1)
1 680 750 121
Test pressure line 11°
1)
1 680 750 122
Parts set
1)
Containing:
Injected quantity hoses
Return quantity hoses
Connection accessories
1 687 016 035
Parts set with adhesive labels for heat ex
-
changer and KMA
1)
1 687 016 032
Parts set for temperature sensor conversion
1)
1 687 016 033
Parts set with EMC accessories
1)
1 687 016 042
Parts set with return adapter for CRI
1)
1 687 016 044
System software EPS 945
1)
1 687 000 956
CD TestData test specifications
1)
1 687 370 270
High-pressure hose
1)
1 680 712 325
Parts set with Ecopur seals (12 x) 1 687 016 068
Parts set for return connection to CRIN
1)
1 687 016 038
Parts set with inlet connector with O-rings (8x) 1 687 016 135
Parts set with return hose 1 680 712 371 (4x) 1 685 016 134
Parts set with guide sleeves (4x)
1680109142 and O-rings (12x; ⌀6.5 x 4)
1687016208
Operating instructions 1 689 989 087
Installation instructions 1 689 978 562
"Wear gloves" and "Hot surface" stickers --
1)
May be included in delivery, depending on the version ordered