Bosch CRI 848H - Connecting High Pressure Hose (Internal Connections)

1 689 989 087 2018-07-24| Robert Bosch GmbH
88 | CRI/CRIN 848H | Preparing for testingen
458847-48_Pal
Fig. 80: Injector with high-pressure hose
5. Align high-pressure hose with connection piece.
6. Tighten the union nut (Fig. 81, item 1). Tightening
torque 25 – 30Nm.
458847-52_Pal
1
Fig. 81: Tighten the union nut
7. Seal unused high-pressure outlets with sealing cone
(Fig. 82, item2) and union nuts (Fig. 82, item 1).
Tightening torque: 25 – 30 Nm
458847-25_Pal
1
25 - 30 Nm
2
Fig. 82: Plug for high-pressure outlet