Modular Fire Panel Installation | en 115
Bosch Sicherheitssysteme GmbH System Description F.01U.028.089 | 8.0 | 2011.07
The technical data can be found in Section 7.5.4 ENO 0000 B Fire Service Interface Module,
page 161.
4.9.6 FPE-5000-UGM Interface Module
The interface module allows the FPA-5000 Modular Fire Panel or an FPA-5000/FMR-5000
network to be connected to a higher-level system such as the UGM 2020, FAT-2002/RE or
FSM-2000, and provides two bi-directional transmission paths.
The module has two LEDs per transmission path for indicating the status (green =
transmission, yellow = fault), and a key for testing the LEDs.
Figure 4.67 FPE-5000-UGM Interface Module
Information on the redundant connection of the module can be found in
Section 3.10 Redundancy, page 47.
The technical data can be found in Section 7.5.5 FPE-5000-UGM Interface Module, page 161.
Labeling Connection
SDI 1 + | - Transmission path 1 Data input + | -
SDO 1 + | - Data output + | -
SDI 2 + | - Transmission path 2 Data input + | -
SDO 2 + | - Data output + | -
To Next Page
Loading...
