24 en | Product Description Modular Fire Panel
F.01U.028.089 | 8.0 | 2011.07 System Description Bosch Sicherheitssysteme GmbH
2.8 Connection to BIS
The MPC Panel Controller can be connected to a building management system (BIS) via an
Ethernet connection and an OPC server.
The connection must be enabled with an ADC-5000-OPC license key (see
Section ADC-5000-OPC License Key, page 98).
Figure 2.8 Connection to BIS
For a multiple-building network, it is essential to clarify with the network administrator:
– whether the network is designed for multiple-building connections (e.g. there must be no
technical interference due to differences in grounding potential)
– whether the bus users are designed for this kind of network (e.g. sufficient bandwidth).
2.9 Connecting a Plena Voice Alarm System
The RS232 interface on the IOS 0020 A or IOS 0232 A enables the FPA-5000 to control up to
120 Plena voice alarm zones. This control can be defined down to the individual detector
level.
The associated virtual VAS triggers are programmed using the FSP-5000-RPS programming
software.
Figure 2.9 Connecting a Plena Voice Alarm System
NOTICE!
The panel controller has an Ethernet-100BaseTx connection (RJ45) as the OPC data access
interface for connecting to a BIS.
BIS
Plena
RS232
LSN
≤ 3m
To Next Page
Loading...
Need help?
General
