Bosch FPA-5000 System Description

72 en | Installation Modular Fire Panel
F.01U.028.089 | 8.0 | 2011.07 System Description Bosch Sicherheitssysteme GmbH
4.5 Power Supply Brackets
The power supply brackets are designed for installation in wall mounting housings and can
hold a UPS 2416 A Universal Power Supply. This is ready for immediate operation via the pre-
wired plug connection.
The brackets are made of fiberglass-reinforced plastic and have a fuse (T 10 A) and a
temperature sensor, which is positioned between the batteries.
Power supply brackets are available in the FPO-5000-PSB-CH (see
Section 4.5.1 FPO-5000-PSB-CH Power Supply Bracket) and FPO-5000-PSB1 (see
Section 4.5.2 FPO-5000-PSB1 Power Supply Bracket) versions.
All frame installation housings designed for a power supply bracket are supplied with one of
these brackets, which is fitted ex works.
DANGER!
The device contains live components.
Touching live components entails a risk of death or serious injury.
Disconnect the power supply before all installation work.
WARNING!
There is a risk of injury if the temperature sensor is not positioned between the batteries.
The temperature sensor is supplied with the power supply bracket and protects the batteries
against overheating. If the sensor is not positioned correctly, the batteries can overheat and
explode.
Position the temperature sensor between the batteries.
NOTICE!
A maximum of one power supply bracket and one power supply can be installed in the power
supply housing.

Bosch FPA-5000 Specifications

General

Max Number of Detectors per Loop	254
Display	LCD
Network Capability	Yes
Power Supply	24 V DC
Operating Temperature	-5°C to +50°C
Communication Ports	Ethernet
Humidity Range	95% non-condensing