S83/85 Ultrasonic Generator Warnings
A40-064 Rev 0 Page 5
1.3 Warnings
Warning: Ultrasonic Power supplies produce high voltage. Before working on an
ultrasonic power supply, do the following (1) turn off the ultrasonic
power supply and unplug AC voltage; and (2) remove the cover and
allow at least 1 minute for capacitors to discharge.
Warning: Transducer (elements) can hold a high voltage charge. Before
troubleshooting or making repairs, discharge voltage by momentarily
shorting pins A and B of the RF connector that plugs into the ultrasonic
power supply.
To Next Page
Loading...