Brother DCP-8152DN User Manual

3-81
Confidential
(4) Remove the taptite bind B M4x12 screw, and release the hook to open the back side of
the hold cover 1. Then remove the hold cover 1 from the machine in the direction of the
arrow.
(5) Release the toner LED harness from the securing fixtures.
(6) Remove the taptite pan B M3x8 screw, and pull out "A" on the pinch earth spring from
the toner LED PCB ASSY. Release the two hooks, disconnect the main fan harness from
the toner LED PCB ASSY while lifting the toner LED PCB ASSY, and remove the toner
LED PCB ASSY from the machine.
(7) Remove the pinch earth spring from the machine.
Fig. 3-110
Harness routing: Refer to “ 1.Main PCB ASSY ” and “ 5.Toner LED PCB ASSY/Main fan ”.
Assembling Note:
• Engage "B" on the pinch earth spring with the spring on the machine.
“A”
Hold
cover 1
Taptite bind B
M4x12
Taptite pan B M3x8
Pinch earth spring
Toner LED PCB ASSY
Hook
Hooks
Pinch earth
spring
“B”
Main fan harness
Toner LED harness
Hooks

Brother DCP-8152DN Specifications

General

Printer Type	Monochrome Laser Printer
Functions	Print, Copy, Scan
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Monthly Duty Cycle	Up to 50, 000 pages
Scanner Type	Flatbed with ADF
Optical Resolution	Up to 1200 x 1200 dpi
Copier Resolution	Up to 1200 x 600 dpi
Network Ready	Yes
Display	LCD
Weight	16.5 kg
Print Speed	Up to 40 ppm
Paper Input Capacity	250 sheets
ADF Capacity	35 sheets
Maximum Paper Size	A4
Maximum Copy Speed	Up to 40 cpm