Brother DCP-8152DN User Manual

5-19
Confidential
1.3.12 Set PC print functions (function code: 43)
<Function>
This function is used to change the settings of the various print functions summarized in the
table below.
<Operation Procedure>
(1) Press the [4] and [3] buttons in this order in the initial state of maintenance mode. "Manual
Feed" is displayed on the LCD.
(2) Press the [ ] or [ ] button to display the function you want to change the setting of,
and press the [OK] button.
(3) For fixed parameters (On/Off, etc.), press the [ ] or [ ] button to display the setting
you want to apply, and press the [OK] button. The setting is saved.
For parameters requiring numerical value entry, use the keypad to enter a numerical
value, and press the [OK] button. The setting is saved.
(4) Press the [Stop/Exit] button to return the machine to the initial state of maintenance
mode.
 Setting functions
LCD Description Set value Default
Manual Feed Manual feed setting On/Off Off
Resolution Print resolution 300/600/1,200 dpi 600 dpi
Toner Save Toner save mode setting On/Off Off
Density Print density level -6 to 6 0
JB-Can Time Time until host timeout is
triggered when job is cancelled
0 to 225 (s) 4 (s)
Sleep Time Time until sleep mode is entered 0 to 99 (min) 5 (min)
Page Protection Page memory setting Off/Letter/A4/Legal/Auto Off
Emulation Emulation (print language)
setting
Auto/HP/PS Auto
Auto I/F Time Interface open time 1 to 99 (s) 5 (s)
Media Type Paper type setting Thin/Plain/Thick/
Thicker/Trancparency/
Recycled/Bond/
Envlopes/EnvThin/
EnvThick
Plain or Thin
Paper Size Image development area setting Letter/Legal/A4/
Executive/B5/JISB5/A5/
B6/A6/Monarch/C5/
COM10/DL/DLL/
A4Long/PostCard/Folio
Letter or A4
Copies Number of copies 1 to 99 (copies) 1 (copies)
Orientation Print direction setting Portrait/Landscape Portrait
P-Pos X-Offset Print position offset in X
(landscape) direction
-500 to 500 (1/300 dpi) 0 (1/300 dpi)
P-Pos Y-Offset Print position offset in Y (portrait)
direction
-500 to 500 (1/300 dpi) 0 (1/300 dpi)
AutoFF Auto form feed setting On/Off Off
AutoFF Time Timeout period of auto form feed 1 to 99 (s) 5 (s)
FF Surpress Blank page skip setting On/Off Off
Auto LF Auto linefeed (LF) setting On/Off Off
Auto CR Auto carriage return (CR) setting On/Off Off
Auto WRAP Setting for Auto CRLF at print
width
On/Off Off

Brother DCP-8152DN Specifications

General

Printer Type	Monochrome Laser Printer
Functions	Print, Copy, Scan
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Monthly Duty Cycle	Up to 50, 000 pages
Scanner Type	Flatbed with ADF
Optical Resolution	Up to 1200 x 1200 dpi
Copier Resolution	Up to 1200 x 600 dpi
Network Ready	Yes
Display	LCD
Weight	16.5 kg
Print Speed	Up to 40 ppm
Paper Input Capacity	250 sheets
ADF Capacity	35 sheets
Maximum Paper Size	A4
Maximum Copy Speed	Up to 40 cpm