Name: Brother DCP-8152DN
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5-40

Confidential

1.3.25 Check fan operation (function code: 78)

This function is used to check that the main fan is operating normally. The rotation speed is

changed among three settings: 100%, 50% and OFF.

(1) Press the [7] and [8] buttons in this order in the initial state of maintenance mode. "F 100" is

displayed on the LCD, and the main fan operates at 100% rotation speed.

If the main fan is faulty, "NG" is displayed on the LCD.

(2) Press the [Start] button. "F 50" is displayed on the LCD, and the main fan operates at

50% rotation speed.

(3) Press the [Start] button. "F 0" is displayed on the LCD, and the main fan stops.

(4) Press the [Start] button. "F 100" is displayed on the LCD, and the status returns to step

(2). Each press of the [Start] button repeats from steps (2) to (4).

(5) When the [Stop/Exit] button is pressed, the machine returns to the initial state of

maintenance mode.

Questions and Answers:

Need help?

Do you have a question about the Brother DCP-8152DN and is the answer not in the manual?

Brother DCP-8152DN Specifications

General