Name: Brother DCP-8152DN
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4-6

Confidential

2. IF YOU REPLACE THE LASER UNIT

• Entering adjusted value of laser unit

 What you need to prepare

(1) One USB cable

(2) Create a temporary folder on the C drive of the computer (Windows

XP or higher).

(3) Service setting tool (BrUsbn.zip)

Copy this file into the temporary folder created on the C drive. Extract the copied file and

double-click "BrUsbsn.exe" to start it.

(4) Download utility (FILEDG32.EXE)

Copy this file into the temporary folder created on the C drive.

(5) Maintenance driver (MaintenanceDriver.zip)

When the maintenance driver is not installed, copy this file into the temporary folder

created on the C drive, and extract the copied file. Refer to "APPENDIX 3 INSTALLING

MAINTENANCE DRIVER" for the installation procedure.

2.1 Entering Adjusted Value of Laser Unit

(1) Enter maintenance mode.

(2) Connect the computer to the machine with the USB cable.

(3) Double-click the "BrUsbsn.exe" file that was copied to the temporary folder to start it.

(4) Click "Laser 11Model".

Questions and Answers:

Need help?

Do you have a question about the Brother DCP-8152DN and is the answer not in the manual?

Brother DCP-8152DN Specifications

General