5-35
Confidential
1.3.23 Setting by country (function code: 74)
<Function>
This function is used to customize the machine according to language, function settings, and
worker switch settings.
<Operation Procedure>
(1) Press the [7] and [4] buttons in this order in the initial state of maintenance mode. The
country code currently set is displayed on the LCD.
(2) Enter the country code you want to set.
(3) Press the [Start] button. The new setting is saved, and "PARAMETER INIT" is displayed
on the LCD. The machine then returns to the initial state of maintenance mode.
(4) When the [Stop/Exit] button is pressed during setting, the machine returns to the initial
state of maintenance mode without saving any changes that have been made.
<Country code list>
Note:
• If there is no entry for one minute or longer, the machine returns to the initial state of
maintenance mode automatically, regardless of the display status.
Country DCP-8110D DCP-8110DN
DCP-8150DN
DCP-8152DN
DCP-8155DN
DCP-8157DN
DCP-8250DN
U.S.A.
-
0001 0301 0501
-
Canada
-----
Brazil
-
0042 0342 5542
-
Argentina
--
0336 0536
-
Chile
---
0536
-
Peru
-----
Germany
-
1053 (1003)
--
5053 (5003)
U.K.
-
1004
--
5004
France
-
1055 (1004)
--
5055 (5004)
Australia
--
0540
-
Norway
-
1004
--
5004
Belgium
-
1055 (1008)
--
5055 (5008)
Netherlands
-
1055 (1004)
--
5055 (5004)
Switzerland
-
1004
--
5004
Finland
-
1004
--
5004
Austria
-
1053 (1014)
--
5053 (5014)
Denmark
-
1004
--
5004
Spain
-
1066 (1015)
--
5066 (5015)
Italy
-
1066 (1004)
--
5066 (5004)
Portugal
-
1066 (1004)
--
5066 (5004)
To Next Page
Loading...
Need help?
General
