Brother DCP-8152DN User Manual

2-51
Confidential
 Error code 9700
When printing from paper tray 1, a paper size not supported for paper tray 1 was specified
from the driver.
 Error code 9800
When printing from paper tray 2, a paper size not supported for paper tray 2 was specified
from the driver.
 Error code 9900
Printing on a paper size not supported for duplex printing was attempted from the driver.
Size Error
Specify the correct paper size for Tray 1.
<User Check>
• Set the Printer Driver's paper setting to a paper size supported for paper tray 1.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Size Error
Specify the correct paper size for Tray 2.
<User Check>
• Set the Printer Driver's paper setting to a paper size supported for paper tray 2.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Size Error DX
Press Stop Key. Specify the correct paper and load the same size paper as the
Printer driver setting.
<User Check>
• Set A4 or Letter-size paper in the tray specified by the driver.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.

Brother DCP-8152DN Specifications

General

Printer Type	Monochrome Laser Printer
Functions	Print, Copy, Scan
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Monthly Duty Cycle	Up to 50, 000 pages
Scanner Type	Flatbed with ADF
Optical Resolution	Up to 1200 x 1200 dpi
Copier Resolution	Up to 1200 x 600 dpi
Network Ready	Yes
Display	LCD
Weight	16.5 kg
Print Speed	Up to 40 ppm
Paper Input Capacity	250 sheets
ADF Capacity	35 sheets
Maximum Paper Size	A4
Maximum Copy Speed	Up to 40 cpm