Brother MFC-L2700D Service Manual

2-15
Confidential
Error
codes
Description
Refer
to:
Error
codes
Description
Refer
to:
7003 ― 7D00 ―
7004 ― 7E00 ―
7100
The eject sensor remains ON (paper
pass detected) even after the
registration rear sensor detected the
end of paper pass.
2-45
8000 ―
7101 ― 8401 ―
7102 ― 8402 ―
7103 ― 8501 ―
7104 ― 8502 ―
7105 ― 8503 ―
7106 ― 8504 ―
7200 ― 8505 ―
7300
When printing from the paper tray, the
registration front sensor does not
detect paper pass within the specified
time after the paper feed sensor
detected paper pass.
2-45 8506 ―
7301 ― 8507 ―
7400 ― 8508 ―
7401 ― 8601 ―
7501 ― 8602 ―
7502 ― 8603 ―
7601 ― 8604 ―
7602 ― 8701 ―
7700
The registration front sensor does not
detect paper pass within the specified
time after the first side was printed in
duplex printing mode.
2-46
8702 ―
7701 ― 8703 ―
7702 ― 8801 ―
7703 ― 8802 ―
7704 ― 8901 ―
7705 ― 8902 ―
7801 ― 8903
The back cover/duplex tray sensor
detected that the cover was open when
duplex printing is started. (Before
registering printing data to engine)
2-47
7802 ― 8904
The back cover/duplex tray sensor
detected that the cover was open
during duplex printing. (After
registering printing data to engine)
2-47
7900 ― 8A01
The registration rear sensor detected
that the paper fed was smaller or
larger than the specified size in duplex
printing mode.
2-47
7C00
The eject sensor was ON when the
power switch was turned ON.
2-46
8A02 ―

Brother MFC-L2700D Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Duplex Printing	Yes
Paper Input Capacity	250 sheets
Monthly Duty Cycle	Up to 10, 000 pages
Functions	Print, Copy, Scan, Fax
ADF Capacity	35 sheets
Memory	32 MB
Fax Speed	33.6 Kbps
Print Speed	Up to 27 ppm
Connectivity	USB 2.0
Scanner Type	Flatbed
Copy Speed	Up to 27 cpm
Scan Resolution	Up to 600 x 2400 dpi
Display	2-line LCD