2-16
Confidential
Error
codes
Description
Refer
to:
Error
codes
Description
Refer
to:
8C00
There is no paper set in the manual
feed slot on the manual feed slot fix
mode.
2-48 9404 ―
8D01 ― 9501 ―
8D02 ― 9502 ―
8E01
The paper size setting for the machine
is other than A4, Letter, Legal or Folio
when receiving fax.
2-48 9503 ―
8E02
Detected that the size of the paper set
to paper tray was over 10 mm shorter
than letter size when receiving fax or
printing a list/report.
2-48
9504 ―
8E03 ― 9505 ―
8F01 ― 9601 ―
8F02 ― 9608 ―
8F03 ― 9701
A tray set to duplex printing-
incompatible size was specified in
duplex printing.
2-50
9001 ― 9702 ―
9002
When printing from the paper tray, the
size of paper set in the paper tray
does not match the size specified by
the driver.
2-49
9703 ―
9003 ― 9704 ―
9004 ― 9705 ―
9005 ― 9801 ―
9102 ― 9802 ―
9103 ― 9803 ―
9104 ― 9804 ―
9105 ― 9901 ―
9200 ― 9902 ―
9301 ― 9903 ―
9302
When printing from the paper tray, the
paper feed sensor detected that there
was no paper set in the paper tray.
2-49 9A01 ―
9303 ― 9A02 ―
9304 ― 9A03 ―
9305 ― 9C01 ―
9306 ― 9C02 ―
9307
Detected that paper has run out
during receiving fax or printing a list/
report.
2-49 9C03 ―
9401 ― 9C06 ―
9402 ― 9C07 ―
9403 ― A000
Image processing cannot be
completed correctly because the
number of pixels required for image
processing is insufficient in the
scanned data for the second side of
the document.
2-50
To Next Page
Loading...
