Transport / Storage
11
CLS Pro 600 – Line and Contrast Sensor 91/108
11 Transport / Storage
11.1 Transport
The equipment will be shipped in accordance with the details stip-
ulated in the order:
■ Completely assembled and interconnected to the web guiding
control system
■ as component parts in standard cardboard boxes with cellular
lining material
The unit must only be transported when it is packed in the original
BST eltromat transport packing.
BST eltromat International GmbH will not be liable for damage
to the sensor or control panel caused by incorrect transport
packaging!
11.2 Storage
If the sensor and the control panel have been shipped as indi-
vidual parts and will not be installed immediately, they must be
stored in a dry room prior to installation.
Storage Conditions:
Temperature: -10°C up to +70°C (max.)
Humidity: 10 - 90% (no condensation)
To Next Page
Loading...
