Description
2
CLS Pro 600 – Line and Contrast Sensor 19/108
WARNING
Caution!
Actuator movements will be run by the drive even during function
checks away from the production machine and/or during commis-
sioning. The relevant safety arrangements must implemented dur-
ing performance checks! Monitor the overall safety concept of the
production machine during commissioning!
2.7 Laser
CAUTION
Please note:
A laser is used as a positioning aid when positioning the sensor.
This laser unit has been classified by the manufacturer as a Class 2
laser in compliance with DIN EN 60825-1:2001-11.
This laser will not cause eye damage, even after long radiation
periods and even if other optical tools (lenses, etc.) are used in
the beam’s path.
2.8 Emissions
The A-rated equivalent continuous sound level of the equipment
is less than 70 dB(A).
To Next Page
Loading...
