12
Decommissioning
92/108 CLS Pro 600 – Line and Contrast Sensor
12 Decommissioning
Decommissioning (scraping) of the system must be carried out to-
gether with the entire machine. The necessary procedures must
be prepared by the manufacturer of the machine. You must take
into consideration that the edge and line contrast sensor is gener-
ally considered to be an electrical / electronic device, which must
be disposed of in accordance with the current legal requirements.
You may also be able to return the system to BST eltromat Inter-
national GmbH. The corresponding agreement must be made first.
To Next Page
Loading...
