3-64
27. Install oil pump. See OIL PUMP, ASSEMBLY/INSTALLA-
TION on page 3-36.
28. Install cylinders and pistons. See CYLINDER AND PIS-
TON, ASSEMBLY/INSTALLATION on page 3-27.
29. Install cylinder heads. See CYLINDER HEAD, INSTAL-
LATION on page 3-20.
30. Install cam gears, gearcase cover, tappet guides and
tappets. See GEARCASE COVER AND CAM GEARS,
ASSEMBLY/INSTALLATION on page 3-46.
31. Refer to INSTALLING THE ENGINE on page 3-10 and
perform the applicable steps.
32. Install ignition system and check/adjust engine ignition
timing. See IGNITION SYSTEM in Section 7.
To Next Page