Name: Buell S1 Lightning
Brand: Buell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

A-4

Part No. HD-34731 Shoulderless Valve Guide

Installation Tool

Part No. HD-34736B Valve Spring Compressor

Part No. HD-34740 Driver Handle and Remover. Used with

HD-34643A and HD-34731.

Part No. HD-34751 Nylon Valve Guide Brush

Part No. HD-34813 Rowe Flywheel Rebuilding Jig

Part No. HD-34816 Oil Pressure Switch Wrench

Part No. HD-35102 Wrist Pin Bushing Hone (20 mm)

Part No. HD-35316-A Main Drive Gear Remover/Installer

and Main Drive Gear Bearing Installer

Questions and Answers:

Need help?

Do you have a question about the Buell S1 Lightning and is the answer not in the manual?

Buell S1 Lightning Specifications

General

Transmission	5-speed
Rear Brakes	Single 230mm disc, single-piston caliper
Compression Ratio	10.0:1
Ignition	Electronic
Engine Type	Air-cooled, four-stroke, 45° V-twin
Rear Suspension	Showa monoshock, adjustable preload, compression and rebound damping
Front Brakes	Single 340mm disc, 6-piston caliper
Seat Height	775 mm
Bore x Stroke	88.8 mm x 96.8 mm
Fuel System	Carburetor
Frame	Tubular steel
Tires	Front: 120/70 ZR17, Rear: 170/60 ZR17