INTELLIDOX DOCKING MODULE USER MANUAL || PREPARE MODULES FOR USE
BW TECHNOLOGIES BY HONEYWELL PAGE 29 OF 103
Insert the Inlet Plugs
Each IntelliDoX Enabler Kit contains inlet plugs. Verify that an inlet plug is inserted into
each unused gas inlet before using the module. Once inserted, the inlet plugs help to
protect the module from dust ingress.
If an inlet plug is damaged or missing, replace it immediately. If plugs are not available,
you may use inlet filters instead. For replacement parts, contact BW Technologies or an
authorized distributor.
Failure to comply may result in damaged equipment.
To Next Page
Loading...
Need help?
General