INTELLIDOX DOCKING MODULE USER MANUAL || TROUBLESHOOTING
BW TECHNOLOGIES BY HONEYWELL PAGE 91 OF 103
Troubleshooting
This section includes the troubleshooting instructions for the product.
Contents
Compliance Tests ........................................................................................................................................ 92
The sensor test fails during bump test or calibration. ..................................................................... 92
The audible alarm test fails during bump test or calibration. .......................................................... 92
The visual alarm test fails during bump test or calibration. ............................................................. 92
Detectors fail to zero. ..................................................................................................................... 93
Detectors ...................................................................................................................................................... 94
The detector firmware is not updated after a new
firmware update file is transferred via USB flash drive. .................................................................. 94
The detector time is incorrect, or is not the same as the module time. .......................................... 94
Daylight Savings Time did not work ............................................................................................... 94
Modules ........................................................................................................................................................ 95
Modules do not assemble into a gang............................................................................................ 95
Modules do not attach to mounting DIN rails. ................................................................................ 95
Modules in a gang do not activate when the power is connected. ................................................. 95
You smell gas in the vicinity of the module. ................................................................................... 95
The LCD changes to red and a pump alarm error message is displayed....................................... 95
The LCD changes to red and a hardware error message is displayed........................................... 96
The module does not recognize a USB flash drive. ....................................................................... 96
The module configuration is not updated when a new configuration file
is transferred via USB flash drive. .................................................................................................. 96
The module displays the message Firmware not supported. ......................................................... 96
The module firmware is not updated when a new firmware update file
is transferred from USB flash drive. ............................................................................................... 97
The module firmware is not updated on modules that are connected in a gang. ........................... 97
Network Connections .................................................................................................................................. 98
The Login web page does not display. ........................................................................................... 98
Calibration of PID Sensor ............................................................................................................................ 99
To Next Page
Loading...
Need help?
General