INTELLIDOX DOCKING MODULE USER MANUAL || HIBERNATION
BW TECHNOLOGIES BY HONEYWELL PAGE 67 OF 103
Configure Hibernation
You must use Fleet Manager II software to create a configuration file to activate
hibernation on insertion. After the configuration file is created, you can use Fleet Manager
II software or a USB flash drive to transfer the file to one or more modules. When a
module is configured to activate hibernation on insertion, the LCD changes to gray and the
hibernation symbol is displayed. All other module functions are disabled.
Detectors in hibernation mode do not respond to gas. Do not use detectors in
hibernation mode as personal protective equipment (PPE).
Work Plan: Configuring Hibernation
1. Create a hibernation configuration file.
2. Transfer the hibernation configuration file to one or more modules via Fleet Manager
II software or USB flash drive.
3. Activate detector hibernation.
To Next Page
Loading...
Need help?
General