INTELLIDOX DOCKING MODULE USER MANUAL || GETTING STARTED
BW TECHNOLOGIES BY HONEYWELL PAGE 6 OF 103
About the IntelliDoX Docking Module
The IntelliDoX Docking Module (‘the module’) is an automatic test and calibration station
for use with portable gas detectors manufactured by BW Technologies. The module
automatically performs essential procedures including sensor identification, bump tests,
calibrations, alarm tests and data transfers. It also retains a cumulative record of detector
datalogs and event logs that are transferred to and stored in onboard memory.
Modules may be used as individual, stand-alone docking stations. They may also be
connected to form gangs of up to 5 modules that function independently. Connected
modules share power, network and gas connections.
Modules may be connected to a network via an Ethernet cable for enhanced access to
and control of administrative and maintenance tasks. Modules are compatible with Fleet
Manager II software, version 4.0 or higher.
Normal Operating Conditions
The module is designed to be safe in the following conditions:
1. Indoor use only;
2. Normal atmosphere (20.9% v/v O
2
) that is free of hazardous gas;
3. Temperature range of +50F to +95F (+10C to +35C) ; and
4. Relative humidity of 10% to 90% non-condensing.
If the intended operating environment does not match these criteria, BW Technologies
recommends that you consult a qualified professional specialist prior to installing and
using any modules.
This equipment uses potentially harmful gas for calibrations. The module must be
attached to a venting system or be used in a well-ventilated area.
Parts and Accessories
Replaceable parts are sold separately. To receive a complete list of replaceable parts
approved for use with this product, contact BW Technologies or an authorized distributor,
or visit the product website at www.honeywellanalytics.com
Gas detectors, calibration and purge gas cylinders, and other accessories are sold
separately. To receive a complete list of calibration gases and accessories approved for
use with this product, contact BW Technologies or an authorized distributor, or visit the
product website at www.honeywellanalytics.com.
Warranty Registration
www.honeywellanalytics.com/support/product-registration
To Next Page
Loading...
Need help?
General