INTELLIDOX DOCKING MODULE USER MANUAL || HIBERNATION
BW TECHNOLOGIES BY HONEYWELL PAGE 70 OF 103
Activating Detector Hibernation
1. Verify that the module is configured for hibernation.
1. The LCD is gray.
2. The hibernation symbol is displayed.
2. Insert a compatible detector into the module. Detector identification is displayed on
the LCD.
3. After the detector is recognized, event logs are transferred to the module.
4. After the event log transfer is complete, hibernation is activated on the detector.
5. Remove the detector from the module and store for future use.
To learn more about hibernation, suitable conditions for detector storage, and detector
reactivation, refer to the appropriate detector operator manual.
To Next Page
Loading...