INTELLIDOX DOCKING MODULE USER MANUAL || CONFIGURE SETTINGS VIA FLEET MANAGER II SOFTWARE
BW TECHNOLOGIES BY HONEYWELL PAGE 59 OF 103
Protect Module Operations with a Passcode
You can configure a passcode to control access to certain module operations. When an
operation is protected by a password, a lock symbol is displayed with the menu icon.
Protected operations that are not performed automatically on insert may be performed
only after the correct passcode is entered on the module. You must use Fleet Manager
II software to configure and manage the passcode.
Configuring a Module Passcode
1. Start Fleet Manager II software, and then log in as an administrator.
2. Select Configure Devices via IntelliDoX on the Devices menu. The IntelliDoX
Configuration Selection dialog box is displayed.
3. Select a configuration file and click OK. The IntelliDoX Device Configuration dialog
box is displayed.
4. Select the tab for a compatible detector, and then select the IntelliDoX
Configuration tab for the compatible detector.
5. In the IntelliDoX Operations section, select the operations you want to protect with a
passcode.
6. In the IntelliDoX Passcode section, click or to select a 4-digit number.
7. Click Save to IntelliDoX to transfer the passcode configuration settings to one or
more modules. For more information, see Transferring the Configuration File to a
Module via Fleet Manager II on page 61.
To Next Page
Loading...
Need help?
General