INTELLIDOX DOCKING MODULE USER MANUAL || GETTING STARTED
BW TECHNOLOGIES BY HONEYWELL PAGE 7 OF 103
What’s in the Box
IntelliDoX Docking Module
Each IntelliDoX Docking Module package contains:
1. One module with a factory-installed nest for a compatible portable gas detector, a
single-inlet key, and an attached end plate;
NOTE: If the end plate is not attached to the IntelliDoX docking module or is
missing, contact BW Technologies or an authorized distributor immediately.
2. One printed Quick Reference Guide;
3. One CD containing the module Operator Manual and Quick Reference Guide in PDF
format; and
4. One CD containing Fleet Manager II software, v4.0 or higher.
The power supply and power cord, Ethernet cable, tubing, inlet filters and plugs, quick
connect fittings, and miscellaneous other fittings are packaged separately as the
IntelliDoX Enabler Kit. One Enabler Kit is required for each individual module or gang of
up to 5 connected modules.
If the module is damaged or if parts are missing, contact BW Technologies or an
authorized distributor immediately.
IntelliDoX Enabler Kit
You need one IntelliDoX Enabler Kit for each stand-alone IntelliDoX module or gang of up
to 5 connected modules. Each Enabler Kit contains:
1. One power supply and AC power cord appropriate to shipping destination;
2. One ethernet cable;
3. Gas tubing, 1/8 inch I.D., 4.6 meters (15 feet);
4. Quick connect fittings;
5. Inlet filters and plugs;
6. Connectors with attached 3/16 inch I.D. tubing for use with demand flow regulators;
7. Miscellaneous connectors;
8. One CD containing the IntelliDoX operator manual and the quick reference guide in
PDF format; and
9. One CD containing Fleet Manager II software, v4.0 or higher.
If Enabler Kit parts are damaged or missing, or if additional Enabler Kits are required,
contact BW Technologies or an authorized distributor immediately.
Fleet Manager II Software
Fleet Manager II is proprietary instrument management software developed by
BW Technologies. You can use Fleet Manager II to:
Configure and manage compatible docking modules and detectors;
Update firmware for compatible docking modules and detectors;
Configure and manage compliance tests;
Import, manage and analyze datalogs, event logs and compliance test results; and
Automate certain procedures and processes for compatible docking modules and
detectors.
To learn more about instrument management via Fleet Manager II software, refer to the
Fleet Manager II Operator Manual or visit the product website at
www.honeywellanalytics.com.
To Next Page
Loading...
Need help?
General