INTELLIDOX DOCKING MODULE USER MANUAL || UPDATE FIRMWARE
BW TECHNOLOGIES BY HONEYWELL PAGE 77 OF 103
Update Detector Firmware
BW Technologies is committed to continuously improving product features and
performance. As a result, firmware updates for detectors may become available.
BW Technologies recommends that you visit the appropriate product site at
www.honeywellanalytics.com to find and download the latest firmware version for your
modules.
Work Plan: Updating Detector Firmware
1. Download and save the firmware update file to a PC or network drive. Do not rename
the file.
2. Transfer the firmware update to a module or gang of modules. See Transferring
Detector Firmware via USB Flash Drive on page 77 or Transferring Detector
Firmware via Fleet Manager II on page 78
3. Update the detector. See Update Detector Firmware on page 77.
4. Verify the firmware version. For more information, refer to the appropriate detector
operator manual.
Transferring Detector Firmware via USB Flash Drive
Follow these instructions to transfer detector firmware via USB flash drive to individual
modules, or to modules that are connected in a gang.
For connected modules, transfer the file to each appropriate module in the gang.
1. Download and save the firmware update file to a PC or network drive. Do not
rename the file.
2. Insert a USB flash drive into a USB port on your PC. Use Windows Explorer or My
Computer to open the USB flash drive, and then create a new folder named
System.
3. Copy the firmware update to the System folder on the USB flash drive. Do not
change the file name or extension. Eject the USB flash drive from the PC.
4. Verify that the detector firmware is appropriate for the module, and then transfer
the file.
1. Insert the USB flash drive into the USB port on the module. The USB File
Copy Utility menu is displayed.
2. Press or to select Copy to dock and then press to continue.
3. The LCD changes to yellow. A progress bar and alternating Do not
remove stick and USB transfer in progress messages are displayed
while the file is transferred.
4. After the transfer is successfully completed, the LCD changes to blue and
the USB File Copy Utility menu is displayed. Press or to select Exit.
Press to continue.
5. The LCD changes to green. Remove the USB flash drive from the port
when prompted.
To Next Page
Loading...
Need help?
General