INTELLIDOX DOCKING MODULE USER MANUAL || CONFIGURE SETTINGS VIA FLEET MANAGER II SOFTWARE
BW TECHNOLOGIES BY HONEYWELL PAGE 60 OF 103
Configure Module and Detector Settings
Certain features, options and settings for the module and/or compatible detectors can be
configured through Fleet Manager II software. You must use Fleet Manager II software to
create a configuration file that is compatible with the module. After the configuration file is
created, transfer it to one or more modules to implement the new configuration settings.
For more information, refer to the Fleet Manager II operator manual and the appropriate
detector operator manual.
Workflow: Configuring Settings
1. Create the configuration file.
2. Transfer the configuration file to one or more modules via Fleet Manager II software
or via USB flash drive.
3. Transfer configuration settings to a detector.
Creating a Configuration File via Fleet Manager II
1. Start Fleet Manager II software, and then log in as an administrator.
2. Select Configure Devices via IntelliDoX on the Devices menu. The IntelliDoX
Configuration Selection dialog box is displayed.
3. Select a configuration file and click OK. The IntelliDoX Device Configuration dialog
box is displayed.
4. Select the tab for a compatible detector, and then select the detector configuration
tab. Modify the available detector features, options and settings as required. For more
information, refer to the Fleet Manager II operator manual and the appropriate
detector operator manual.
5. Select the IntelliDoX Configuration tab. Modify the available features, options and
settings as required. For more information, refer to the Fleet Manager II operator
manual and the appropriate detector operator manual.
6. Transfer the configuration settings to one or more modules via Fleet Manager II or
USB flash drive. For more information, refer to:
1. Transferring the Configuration File to a Module via Fleet Manager II on
page 61.
2. Transferring the Configuration File to a Module via USB Flash Drive on
page 62.
7. Save the configuration file to PC or network folder, if necessary.
To Next Page
Loading...
Need help?
General