Canon IMAGECLASS LBP654CDW - Logging in to the Machine

Logging in to the Machine
1648-02U
If Department ID Management is enabled or System Manager IDs are enabled, you must log in before using the
machine. When the logon screen appears, use the procedure below to enter the Department ID and PIN.
1
Enter the ID.
1
Select <Department ID> or <System Manager ID>.
2
Enter the ID.
● If no PIN is registered, proceed to step 3.
2
Enter the PIN.
1
Select <PIN>.
2
Enter the PIN.
3
Press <Log In> ( ).
➠
The login screen will be changed to the Home screen.
● After you nish using the machine, press <Log Out> ( ) to display the login screen.
LINKS
Setting the Department ID Management(P. 226)
Setting the System Manager ID and PIN(P. 224)
Basic Operations
123