Canon IMAGECLASS LBP654CDW - Using Airprint

Using AirPrint
1648-07C
This section describes the settings required to use AirPrint and the procedures to be performed using Apple devices.
AirPrint Settings
Conguring AirPrint Settings(P. 208)
Displaying the Screen for AirPrint(P. 210)
Functions of the AirPrint
Printing with AirPrint(P. 213)
Troubleshooting
If AirPrint Cannot Be Used(P. 216)
Conguring AirPrint Settings
You can register information, including the name of the machine and installation location, that is used for identifying
the machine. You can also disable the AirPrint function of the machine. Use the Remote UI to change these settings.
● For more information about the basic operations to be performed when setting the machine from the
Remote UI, see Setting Up Menu Options from Remote UI(P. 283) .
1
Start the Remote UI and log in to System Manager Mode. Starting Remote
UI(P. 275)
2
Click [Settings/Registration] on the Portal page. Remote UI Screen(P. 276)
● If you are using a mobile device, such as an iPad, iPhone, or iPod touch, read "click" as "tap" in this section.
3
Select [Network Settings] [AirPrint Settings].
4
Click [Edit].
5
Specify the required settings.
Linking with Mobile Devices
208