Canon IMAGECLASS LBP654CDW - Configuring Ethernet Settings

Conguring Ethernet Settings
1648-015
Ethernet is a standard for communicating data in a local area network (LAN). You can set
the communication mode and the Ethernet type. In general, the machine can be used
without changing the defaults ( <Ethernet Driver Settings>(P. 321) ), but you can
change these settings to suit your network environment.
1
Select <Menu> in the Home screen. Home Screen(P. 107)
2
Select <Preferences> <Network>.
● If the login screen appears, enter the correct ID and PIN. Logging in to the Machine(P. 123)
3
Select <Ethernet Driver Settings>.
4
Select whether to congure Ethernet settings automatically or manually.
● If auto-detection is enabled, the machine detects and automatically sets the Ethernet communication mode
and the type that can be used.
Conguring Ethernet settings automatically
Touch panel model
Select <On> in <Auto Detect>.
Black and white LCD model
Select <Auto Detect>
<On>.
Conguring Ethernet settings manually
1
Congure a setting to disable Auto Detect.
Touch panel model
● Select <Off> in <Auto Detect>.
Black and white LCD model
● Select <Auto Detect> <Off>.
2
<Communication Mode> select the communication mode.
Setting Up
61